Key Tips for Boiler Heating System Maintenance

A boiler heating system has become the new normal in both households and industries for different purposes. But maintaining a Boiler Heating System can be difficult, which is why the article focuses on some maintenance tips that can come in handy.

Boiler Heating System | Mckenna Boiler

Essential Boiler Heating System Maintenance Tips

Boiler Pressure Inspection

The boiler pressure needs to be at the perfect pressure so that the hot water gets circulated around the radiators and the pipes inside the place. Check the pressure gauge to ensure that it is working according to the user instructions given in the manual. Doing the same is pretty easy and can be done by the homeowner themselves.

Annual Servicing is Important

To ensure that the boiler is offering optimal performance and to avoid any breakdowns, it is important that you service the machine every year. This helps in keeping the bills low while also increasing the life span of the Hot Water Boiler Heating System. Hire a professional boiler heating system technician to check about all the elements and to identify and fix small issues before they become severe and cost you money and time.

Balancing the Radiators

Try to balance out the radiators in case the ones farther away from the boiler are cooler than the ones that are near the boiler for maintaining them. Balancing radiators isn't as easy as bleeding them but can eventually help the system to heat evenly throughout the property.One of the general radiator problems is that they remain hot from the top but remain cold from the bottom. The reason is that all the debris and dirt that gets built over the system with time gets settled at the bottom of the radiator.Not only does it make it harder to heat the building but it also increases energy bills. This is why you need to contact an engineer for performing a power flush. Chances are that the valve may need to be replaced in case the radiator isn't heating and the valve is open.

Ensure Ventilation

It is no secret that boilers require plenty of space so to ensure proper ventilation to further check that the boiler isn't cluttered, meaning that there are no coats hung over it. Boilers can easily be stored in a cupboard as long as there is a bare minimum gap of 700mm between the boiler and the wall or the obstruction.

 Make sure that Flame is Blue

It is important to check that the boiler is always burning with a strong blue flame . In case the flame is orange or yellow, make sure that you contact a boiler engineer as soon as possible since there might be a risk of a carbon monoxide leak.

Inspect the External Pipe

The external pipe is also known as the overflow pipe. If you ever notice that water is dripping from it, it could further imply that the boiler isn't operating properly. Chances are that a professional might have to fix the pressure release valve. So, it is best to start finding a local engineer as fast as possible.

Ensure Accessibility

Flue regulations state that flues should be accessible and visible so that cracks or lose joints can be spotted with relative ease. In case the flue isn't accessible, per se, it goes into the ceiling, you might have to hire an engineer for installing an access panel.

Don't DIY

Make sure not to try things on your own and contact a boiler technician for any kind of issues. Working with gas pipes can be pretty dangerous if it isn't handled with care, further leading to lethal consequences such as explosions, fires, and carbon monoxide poisoning.